Fireplace insert Lina W 7363
| Front: | Boiler unit open on one side, based on the Lina series, completely washed with water |
|---|---|
| Front version: | crystal |
| Inner lining: | Chamotte smooth "premium white" |
| Front Width: | 760 mm |
| Front Height: | 630 mm |
| Type: | optionally swiveling or pushing up |
| Power: | 14,9 kW |
| Energy efficiency class according to (EU) 2015/1186: |  |
| 1. BImSchV level 2: | ja |
crystal
The "crystal" front finish is standard with us. With this version, you receive your fireplace insert with a 4-sided printed glass ceramic. This gives your fireplace a classy and modern look.
"Premium White"
The combustion chamber is lined with innovative chamotte in "premium white" or "anthracite" - on the side with striped chamotte, in the lower area with solid floor stones with a thickness of up to 60 mm. The latest-class chamotte is also particularly hard-wearing with a higher density. And thanks to the less beige color, the fireplace inserts can be integrated even better into different living styles.
Technical data
| Nominal heat output | 14,9 kW |
| Water heat output | 10,6 kW |
| Efficiency | > 80% |
| Insulation thickness (if the wall is not to be protected) (based on SILCA® 250KM) | 60 mm |
| Combustion air inlet | Ø 150 etc. |
| recommended log length | 33 cm |
| Weight | 330 360-kg |
| Heat emission: through the lens | 10 % water content |
| Heat emission: convective power | 20 % water content |
| Heat emission: water-side performance | 70 % water content |
| water content | 80 ltr. |
| Maximum operating pressure | 3,0 bar |
Data for chimney sweeps according to DIN EN 13384
| Exhaust gas mass flow | 14,2 g / s |
| exhaust gas temperature | 245 ° C |
| required delivery pressure | 12 Pa |
Fireplace insert Lina W 7363 hData sheet including energy label and technical documentationpdf 524KB
Fireplace insert Lina W 7363 sData sheet including energy label and technical documentationpdf 560KB
models
