Heating insert SH 8 G & SH 8 G / B
That certain plus ...
The SH 8 G and SH 8 G / B essentially corresponds to the SD 6 F heating insert - but is equipped with a larger viewing window and an outside air connection.
| Model: | SH 8G | SH 8 G / B |
|---|---|---|
| Front panel: | 420 x 820 mm | 480 x 825 mm |
| body: | 330 x 700 x 450 mm | 330 x 700 x 460 mm |
| Type: | Door hinge on the right, self-closing, not changeable | Door hinge on the right, self-closing, not changeable |
| Power: | 8 kW | 8 kW |
Multiple glazing
The multiple glazing ensures approx. 30% less heat emission via the glass pane, higher combustion chamber temperatures and clean panes over a longer period of time.
inner lining
Our heating inserts are equipped with solid fireclay bricks which are placed in the device dry, without walling in.
stove body
The furnace body consists of high-temperature resistant furnace casting. This material has proven itself over decades.
Technical data
| Nominal heat output including NHK | 8 kW |
|---|---|
| Output range | 3,1-7,2 kW |
| Efficiency | > 80% |
| Insulation thickness (if the wall is not to be protected) (based on SILCA® 250KM) | 60 mm |
| Combustion air inlet | Ø 125 etc. |
| Max. firewood length | ? cm |
| Weight including chamotte | 155 160-kg |
| Heat emission: through the lens | 10 % |
| Heat emission: convective power | 90 % |
Data for chimney sweep according to DIN EN 13384 (closed)
| Exhaust gas mass flow | 7,5 g / s |
|---|---|
| Exhaust gas temperature behind the additional button | 240 ° C |
| required delivery pressure | 12 Pa |
| firing | 11,6 kW |
|---|---|
| Exhaust gas mass flow | 14,7 g / s |
| Exhaust gas temperature before the post button | 498 ° C |
| required delivery pressure | 15 Pa |
| Combustion air requirement | 33,2 m³ / h |
models
SD 6 F