Heating insert SD 9 E | SD 11 E
The "workhorse"
The SD 9 E - the workhorse among the heating inserts. Due to the special air duct, this device is also suitable for difficult chimney conditions, larger logs. The underbody is made entirely of cast iron, which enables a strong supply of combustion air to the ember bed. Heating with wood or brown coal? Since the end of 2016, the SD 9E and SD 11 E have now also been approved for mixed firing. So you can change the fuel type quickly and easily.
| Model: | SD 9 E | SD 11 E |
|---|---|---|
| Front panel: | 480 x 825 mm | 480 x 825 mm |
| body: | 410 x 780 x 475 mm | 410 x 750 x 620 mm |
| Type: | Door hinge on the right, self-closing, not changeable | Door hinge on the right, self-closing, not changeable |
| Wood performance: | 9 kW | 11 kW |
| Performance of brown coal briquettes: | 9 kW | 7 kW |
Standard
doorstop
right-wing
Double
glazing
mixed fire
Combustion
air connector
1. BImSchV
Level 2
Energy-
efficiency-
Class
to (EU)
2015/1186
Multiple glazing
The multiple glazing ensures approx. 30% less heat emission via the glass pane, higher combustion chamber temperatures and clean panes over a longer period of time.
inner lining
Our heating inserts are equipped with solid fireclay bricks which are placed in the device dry, without walling in.
stove body
The furnace body consists of high-temperature resistant furnace casting. This material has proven itself over decades.
Technical data
| SD 9 E wood | SD 9 E BKB | SD 11 E wood | SD 11 E BKB | |
|---|---|---|---|---|
| Nominal heat output including NHK | 9 kW | 9 kW | 11 kW | 7 kW |
| Output range | — | — | 6-11,2 kW | 3,1-7,2 kW |
| Efficiency | > 80% | > 80% | > 80% | > 80% |
| Insulation thickness (if the wall is not to be protected) (based on SILCA® 250KM) | 60 mm | 60 mm | 60 mm | 60 mm |
| Combustion air inlet | Ø 125 etc. | Ø 125 etc. | - | - |
| Max. firewood length | ? cm | ? cm | ? cm | ? cm |
| Weight including chamotte | 200 kg | 200 kg | 150 kg | 150 kg |
| Heat emission: through the lens | 10 % | 10 % | 10 % | 10 % |
| Heat emission: convective power | 90 % | 90 % | 90 % | 90 % |
Data for chimney sweep according to DIN EN 13384 (closed)
| SD 9 E wood | SD 9 E BKB | SD 11 E wood | SD 11 E BKB | |
|---|---|---|---|---|
| Exhaust gas mass flow | 9,3 g / s | 9,3 g / s | 12,3 g / s | 6,5 g / s |
| Exhaust gas temperature behind the additional button | 279 ° C | 227 ° C | 201 ° C | 181 ° C |
| required delivery pressure | 12 Pa | 12 Pa | 12 Pa | 12 Pa |
| SD 9 E wood | SD 9 E BKB | SD 11 E wood | SD 11 E BKB | |
|---|---|---|---|---|
| firing | 25,3 kW | - | 15,6 kW | - |
| Exhaust gas mass flow | 26,1 g / s | - | 14,3 g / s | - |
| Exhaust gas temperature before the post button | 420 ° C | - | 510 ° C | - |
| required delivery pressure | 15 Pa | - | 15 Pa | - |
| Combustion air requirement | 73 m³ / h | - | 33,7 m³ / h | - |
models
SH 8 G & SH 8 G / B